top of page

CHIAMARE PER QUOTAZIONE

 

POWER OUTPUT

750 watts per channel continuous from 20Hz to 20kHz. 1kHz total harmonic distortion typically 0.5% at 750 watts, below .04% at 1 watt. Approximate actual power available at “clipping” 850 watts (1kHz). (Note that actual power output is dependent upon both line voltage and “condition” i.e. if power line has high distortion, maximum power will be affected adversely, although from a listening standpoint this is not very critical.)

POWER BANDWIDTH

(-3dB points) 15Hz to 150kHz.

FREQUENCY RESPONSE

(-3dB points at 1 watt) 1 Hz to 200 kHz.

INPUT SENSITIVITY

4.6V RMS Balanced for rated output. (24 dB gain into 8 ohms.)

INPUT IMPEDANCE

200K ohms Balanced.

 

OUTPUT TAPS

4, 8, 16 ohms.

OUTPUT REGULATION

Approximately 0.5dB 16 ohm load to open circuit (Damping factor approximately 17).

OVERALL NEGATIVE FEEDBACK

13dB.

SLEW RATE

20 volts/microsecond.

RISE TIME

1.5 microseconds.

HUM & NOISE

Less than 0.2mV RMS – 110dB below rated output (IHF-A weighted, input shorted, 16 ohm output).

 

POWER SUPPLY ENERGY STORAGE

Approximately 1300 joules.

POWER REQUIREMENTS

105-130VAC 60Hz (200-270VAC 50Hz) 2100 watts at rated output, 2400 watts maximum, 800 watts at “idle”.

TUBES REQUIRED

8 Matched pair KT150 Power Output; 1 6550WE Regulator; 1 6H30 Regulator Amplifier; 1 matched pair KT150 Driver; 1 6H30 follower.

DIMENSIONS

13.5″ (34.3 cm) W x 23″ (58.4 cm) H x 20.8″ (52.8 cm) D. Handles extend 1.5″ (3.8 cm) forward and rearward.

WEIGHT

170 lbs. (77.2 kg) Net; 395 lbs. (180 kg) per pair shipped weight.

AUDIO RESEARCH REFERENCE 750SEL AMPLIFICATORE FINALE MONO

€0.00Price
    bottom of page